Kroon Professional Lighting Solutions
Kroon Professional Lighting Solutions
Parabool 100
3364 DH Sliedrecht
+31 (0) 184-447977 - info@kroon-lights.nl
Dé leverancier voor al uw verlichting en noodverlichting

 

Emergency lighting modules LED Serie ELT61

Emergency lighting modules LED Serie ELT61
Emergency lighting modules LED Serie ELT61
Advies nodig over Emergency lighting modules LED Serie ELT61?
  • Neem contact op met onze afdeling verkoop
  •  
  •  
Of bel: +31 (0) 184 - 447977
Productbeschrijving
  • Maintained or non maintained operation 
  • Suitable for electronic driver, dimmable electronic driver 
  • Adjustable version dip-switch, constant current or constant voltage to power LED to LED modules 
  • Automatic operation 
  • High temperature NiCd batteries 
  • Charge indicator with led 
  • Protection device against extensive discharge 
  • Rest mode facility with remot control device 
  • Self diagnosis system with MAT2 external module 
  • DALI self diagnosis system with external MAT3 module 
  • Charging device with supply is reinforced insulation able to recharge the battery normally after the test in clause 22.3 of the IEC 61347-2-7:2007 
  • Complying with EN61347-2-13, EN61347-2-7, EN61547, EN55015, EN60598-2-22, EN61000-3-2, SELV

Electronic units

  • Supply Voltage: 220-240V – 50/60 Hz
  • Supply current: 20 mA - 0,6
  • Max case temperature: 70°
  • Ambient temperature: 0 ÷ 50° C
  • Recharging time: 24 h
  • Max distance between inverter and lamp: 3m
  • Screwless terminals max connection size: 1,5 mmq
  • Cables with diameter: 2x0,75mm2 - H03VV-F
  • Length battery cable: 200mm
  • Length led cable: 350mm
  • Led mounting hole: ø 8.8mm

Data sheet (PDF)

Product instruction (PDF)

Flux chart (PDF)

Certificering (PDF)

Catalogus Alvit 2018 (PDF)

Vraag direct een offerte aan
Kroon Professional Lighting Solutions
  • Altijd deskundig advies
  • Europese kwalititeit
  • Ruime voorraden
  • Korte levertijden
  • Garantie tot 5 jaar
  • Uitmuntende prijs / kwaliteitsverhouding
Artikel Artikelcode Dip-switch positionworking voltage in emergency - (VL)Emergency output current - (I)Maximum number of power LEDs in currentLive LED ModulesAutonomyBattery
ELT6171 ELT6171 A9 - 12V350 - 300mA NLED=12 / VF12V - 2A Max1h 7,2V - 1,6Ah
ELT6171 ELT6171 B9 - 24V350 - 160mA NLED=24 / VF24V - 2A Max1h 7,2V - 1,6Ah
ELT6171 ELT6171 C9 - 45V350 - 80mANLED=45 / VF-1h 7,2V - 1,6Ah
ELT6171 ELT6171 D9 - 57V350 - 60mANLED=57 / VF-1h 7,2V - 1,6Ah
ELT6174/3 ELT6174/3 A 9 - 12V 350 - 300mA NLED=12 / VF12V - 2A Max3h7,2V - 4Ah
ELT6174/3 ELT6174/3 B9 - 24V350 - 160mA NLED=24 / VF24V - 2A Max3h7,2V - 4Ah
ELT6174/3 ELT6174/3 C9 - 45V350 - 80mANLED=45 / VF-3h7,2V - 4Ah
ELT6174/3 ELT6174/3 D9 - 57V350 - 60mA NLED=57 / VF-3h7,2V - 4Ah
ELT6171/3 ELT6171/3 A 9 - 12V 210 - 165mA NLED=12 / VF12V - 2A Max3h 7,2V - 1,6Ah
ELT6171/3 ELT6171/3 B9 - 24V210 - 90mA NLED=24 / VF24V - 2A Max3h 7,2V - 1,6Ah
ELT6171/3 ELT6171/3 C9 - 45V210 - 45mANLED=45 / VF-3h 7,2V - 1,6Ah
ELT6171/3 ELT6171/3 D9 - 57V210 - 30mA NLED=57 / VF-3h 7,2V - 1,6Ah