Driver LMAI 44/0500 P020 SPI 48 V
Engine SLE PREMIUM

LMAI without strain relief set

LMAI with strain relief set
Product description
- 500 mA PWM output signal
- Short-circuit protection with automatic restart
- No-load detection with automatic restart
- Intelligent temperature management for LED and LMAI (protection against thermal damage)
- Connecting cable, wire cross-section 0.75 – 1.5 mm²
- Power input on stand-by 0 W
- Output power max. 44 W
- Strain relief for snap in (only for LMAI with strain-relief set)
Properties
- Use only with LED Driver and LED module possible
- Dimming range 15 to 100 %
- Dimming curve adapted to the sensitivity of the eye
- Max. acceptable cable length between LMAI and module 500 mm
- SELV
- Type of protection IP20 (for LMAI with strain-relief set)
|
Rated voltage range DC | 48 V |
Input voltage DC | 47 – 51 V |
Rated current (at 48 V DC) | 0.9 A |
Max. input power with fan | 45.5 W |
Stand-by power | 0 W |
Output voltage range | 14 – 44 V |
Output current tolerance | ± 7 % |
Output current | 500 mA |
Output power | 44 W |
Dimming range | 15 – 100 % |
PWM frequency | 312 Hz |
Voltage FAN DC | 12 V |
Max. operating current FAN | 100 mA |
Max. switch-on current FAN | 200 mA (< 5 ms) |
Max. permitted capacity FAN | 58 µF |
Ambient temperature ta (at life-time 50,000 h) | -20 ... +45 °C |
Max. casing temperature tc | 55 °C |
Storage temperature ts | -40 ... +80 °C |
Downloads (HTML)
Certificates (HTML)